Sharp UP-810F Cash Register User Manual


 
229
• When you want to manually install a new roll of paper while your machine is turned off, follow the steps
shown below:
1 Pull the print head release lever toward you to lift up the print head.
2. Correctly place the new paper roll into the paper roll location.
3. Insert the paper end into the paper chute until it comes out of the printer.
4. Return the print head release lever to its original position.
5. Cut off the excess paper with the paper slot guide.
Removing the paper roll
When a red dye appears on the paper roll, it is time to replace the existing paper roll. Replace the paper roll
with a new one. If you plan not to use your POS terminal for an extended period of time, remove the paper
roll, and store it in the appropriate place.
Removing the receipt paper roll
1. Remove the printer cover.
2. Cut the paper behind the printer and near the paper roll.
3. Press the
Ï
key until the paper remaining in the printer
comes out completely.
4. Remove the paper roll from the back of the printer.
Do not pull the paper through the printer.
NOTE