41
■ Scale entries
You have a choice of either the manual or automatic method for scale entry.
If the first method is chosen, the clerk needs to enter the reading of the scale manually. If the second one is
chosen, the weight is automatically read from the connected scale (option) and appears in the POS terminal
display. If you need manual scale entries, contact your authorized SHARP dealer.
Auto scale entries
FF method
Normal method
• Tare weight: Up to 4 digits (integer + decimal)
• Scale table number: 1 to 9
• The POS terminal can be programmed with up to nine scale tables and allows different tares to
be assigned to them.
• When the
S
key is pressed, the net weight is automatically read from the connected scale
(option) and appears in the POS terminal display.
• When the PLU is programmed for “Compulsory scale entry,” it is not necessary to press the
S
key.
• To issue a receipt which shows only a tare weight, press
o
, enter a tare weight, then press
S
and
c
.
• The currency descriptor is displayed/printed when it is programmed for the CHECK.
Scale table number
Tare weight
When you use a
programmed scale
table number.
Item selection
thru Tare weight
o
Unit price
Scale table number
When you use a
programmed scale table no.
oBA
S
Unit price
Department key
When you use a programmed
unit price
Unit price Dept.code
`à
PLU code
Unit price
Direct PLU
Unit price
u`
PLU code
u
S
Direct PLU
Scale table number
Tare weight
When you use a
programmed scale
table number.
o
S
