Filter
Top Products
<P=002>
Being polled (polling standby)
To let another fax machine poll your machine, simply set the reception
mode to FAX, and load the document(s) to be sent.
Transmission will take place when the other fax machine calls your
machine and activates polling. Automatic reception is possible while
your machine is on polling standby.
Polling security
Polling Security allows you to prevent unauthorized polling of your
machine. When this function is turned on, polling will only take place
when the fax number of the polling fax machine has been entered in
your machine’s list of permitted fax numbers (called "passcode
numbers"). The number of the polling fax must also be programmed
in itself for identification.
To use Polling Security, follow the steps below to turn the function
on, and then enter permitted numbers as shown on the following page.
1
Press the keys shown at right.
ENTRY MODE will appear in the
display.
FUNCTION
3
2
Press the
#
key three times.
SECURITY SELECT will appear in
the display.
3
Press
1
to turn polling security on, or
2
to turn it off.
or
1
2
4
Press the
START/MEMORY
key and
then the
STOP
key.
START/MEMORY
STOP
Polling (Requesting a Fax Transmission)
84