Sharp XE-A507 Barcode Reader User Manual


  Open as PDF
of 2
 
4
Installing Paper Rolls
The register can print receipts and journals. For the printer, you must install the paper rolls
(receipt and journal paper rolls) provided with the register.
NOTE
•Installthepaperrollintheprinter.Becarefulthentosettherollandcutthepaperendcorrectly.
To the printer
Incorrect
To the printer
Correct
Correct Incorrect
(How to set the paper roll) (How to cut the paper end)
■
For receipt paper installation
1. Remove the printer cover.
2. Lift up the print roller arm of the receipt side.
3. Set a paper roll in the paper roll cradle of the receipt side as per the diagram.
4.
Feed the end of the paper along with the paper positioning guides as per the diagram.
5. While holding down the paper, slowly close the print roller arm of the receipt side,
and push down the arm until you hear a click locking the arm.
6. Cut off the excess paper.
Print roller
arm
Paper positioning
guides
■
For journal paper installation
Spool
Paper holding
plate
7. Lift up the print roller arm of the journal side.
8. Set a paper roll in the paper roll cradle of the journal side.
9. While holding down the paper, slowly close the print
roller arm of the journal side, and push down the arm
until you hear a click locking the arm.
10.
Remove the paper holding plate from the spool.
Insert the end of the paper into the slit in the spool.
(Press the journal paper feed key to feed more paper
if required.)
Wind the paper two or three turns around the spool shaft.
11.
Mount the paper holding plate onto the take-up spool.
Set the spool on the bearing, and press the journal
paper feed key to take up excess slack in the paper.
12. Replace the printer cover.
13.
For the receipt paper, press the
{
key to make sure the paper
end comes out of the printer cover and clean paper appears.
5
Now, you are ready!
■
Prior to Making Entries
● Mode selection
In the REG mode, you can operate the entries. If another mode is selected, press the
a
key to return to the REG mode.
● Clerk entry
Enter a clerk code (1 to 40) and press
L
key. (Once the clerk code is entered, re-entry of
the clerk code is not needed until the clerk is changed.) Example: 1
L
(Clerk no. 1 entry)
■
Registration Example (when selling department items by cash)
1. Select the REG mode.
2. Enter your clerk code.
3. Enter the price for the rst department item.
For example for 5.00, enter
5
:
,
press the appropriate department key.
For department 21 to department 40,
press
d
rst before pressing the department
key.
For department 41 and above, enter the department
code using numeric keys, and press
d
,
then enter the price and press
A
.
4. Repeat step 3 for all the department items.
5.
Press
Q
to display the amount due.
6. Enter the amount received from the customer.
(You can omit this step if the amount tendered is
the same as the subtotal.)
7.
Press
A
, and the change due is displayed
(when the amount received was not entered,
total amount is displayed) and the drawer is opened.
8. Tear off the receipt and give it to the customer with his or her change.
9. Close the drawer.
How to download Customer Support Tool:
Customer Support Tool can be downloaded from the Sharp web site.
Please visit the Sharp web site: http://www.sharpusa.com/registersoftware
When an error occurs:
When an error occurs with an alarm sound, press
l
to clear the error. If you do not clear the
error, press
a
twice. The transaction will be nalized in subtotal void or cash sale.
1 L
5 : 1
8 2 5 d 2
(Price and dept. 1)
(Clerk code entry)
(Price and dept. 22)
Q
2 : 0
A
(Amount tendered)
Printed in Korea T(TCADH2587BHZZ)
 previous