Sharp XR-32X-L Projector User Manual


 
27
Basic
Operation
3 Adjusting the Height
The height of the projector can be ad-
justed using the adjustment feet at the
front and rear of the projector.
When the screen is above the projec-
tor, the projection image can be made
higher by adjusting the projector.
1
2
3
Do not apply too much pressure on the pro-
jector when the front adjustment foot comes
out.
When lowering the projector, be careful not to
get your fingers caught in the area between
the adjustment foot and the projector.
Hold the projector firmly while lifting or carrying.
Do not hold by the lens area.
Use the rear adjustment foot to
make the projector level.
The projector is adjustable ±2 degrees
from the standard position.
Remove your hands from the
HEIGHT ADJUST lever of the pro-
jector after its height has been
finely adjusted.
The angle of projection is adjustable up
to 9 degrees from the surface on which
the projector is placed.
Lift the projector to adjust its
height while lifting the HEIGHT
ADJUST lever.
Info
When adjusting the height of the projector,
trapezoidal distortion occurs. Follow the pro-
cedures in Keystone Correction to correct the
distortion. (See pages 28 and 43.)
Note
HEIGHT
ADJUST lever
Make small
adjustments.
Rear adjustment foot