Sharp XV-Z200U Projector User Manual


 
Basic Operation
-31
3 Press , , , or
on the remote control or on
the projector to select the IN-
PUT mode.
After pressing once on the projector,
use
to select the desired input mode.
Note
When no signal is received, “NO SIG-
NAL” will be displayed. When a sig-
nal that the projector is not preset to
receive is received, “NOT REG.” will
be displayed.
About the INPUT modes
Used for projecting im-
ages from equipment
connected to INPUT 1
terminals.
Used for projecting im-
ages from equipment
connected to INPUT 2
terminal.
Used for projecting im-
ages from equipment
connected to INPUT 3
terminal.
Used for projecting im-
ages from equipment
connected to INPUT 4
terminal.
Used for projecting im-
ages from equipment
connected to DIGITAL
INPUT terminal.
INPUT 1
(Compo-
nent)
INPUT 2
(Compo-
nent/RGB)
INPUT 3
(S-Video)
INPUT 4
(Video)
DIGITAL
On-screen Display
Selecting the On-
screen Display Lan-
guage
English is the preset language for the On-
screen Display; however, this can be changed
to German, Spanish, Dutch, French, Italian,
Swedish, Portuguese, Chinese, Korean or
Japanese.
Display the “Language” menu and se-
lect the desired Language.
For operating the menu screen, see
pages 38 to 41.
INPUT 1 Mode
INPUT 2 Mode
INPUT 3 Mode
INPUT 4 Mode
DIGITAL INPUT Mode
"On-screen Display (Example)
XV_Z200U_E_p29_43.p65 03.10.28, 1:54 PM31