Filter
Top Products
12
4. Click on the Plus (+) sign next to the CD-ROM drive,
then double click the 64bit folder.
5. Highlight AMD64 (for 64-bit extended processors)
or IA64 (for 64-bit Intel Itanium processors), then
click Ok.
6. Select Silicon Image... SATALink Controller, then
press Next.
7. Follow the on-screen instructions to complete the
installation.
For Existing Windows Vista 64-bit Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, select Locate
and install driver software (recommended), click
Continue.
3. Insert the driver CD, click Next.
4. Click Close to complete the installation.
To Verify Windows Vista Installation
1. Right click My Computer and click Manage.
2. Click Continue, click Device Manager.
3. Double click Storage controllers, Silicon Image
SiI... Controller should be displayed.
Windows Server 2008 (32-bit)
New Windows 2008 Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do you want to install Windows?, click
Load Driver.
3. Insert driver CD, then click Browse.
4. Click CD Drive...Drivers, then click OK.