Filter
Top Products
5
2. Check Specify a location, uncheck the other box,
insert the driver CD, type in X:\1P\ME, then click
Next. (Change X: to match your CD-ROM drive
letter)
3. Click Next, then Finish.
4. Restart Windows to complete the driver installation.
Windows NT 4.0 Driver Installation
1 From the desktop, click Start, then Run.
2. Insert the driver CD, type X:\1P\NT4\setup.exe,
then click OK. (Change X: to match your CD-ROM
drive letter)
3. At the Welcome window, click Continue.
4. At the Multi-IO Drivers Setup window, click Next.
5. Select Yes and click Finish to restart NT to complete
the driver installation.
Windows 2000 Driver Installation
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(Recommended), then click Next.
3. Select Specify the location, uncheck the other boxes,
then click Next.
4. Insert the driver CD, type in X:\1P\2000, then click
OK. (Change X: to match your CD-ROM drive
letter)
5. Click Next, then click Finish to complete the driver
installation.