Filter
Top Products
16
For An Existing Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware window, click Locate
and install the driver automatically (recommended).
3. Insert the driver CD, click Continue.
4. Click Next, then click Close.
5. Remove the driver CD, shutdown Windows, and
setup your RAID array.
When Windows resumes, go to SATARaid GUI on page
17 and install the RAID monitoring utility.
To Verify Windows Vista Installation
1. Right click Computer, click Manage, click Continue,
select Device Manager.
2. Double click Storage controllers, Silicon Image SiI
3512 SATARaid Controller should be displayed.