Filter
Top Products
5
Windows Installation
Important: Do not connect the USB 2.0 Switch to your
system until after the driver has been installed. In order
for the driver to install properly the Power LED to that
system must be switched to another system. For example,
if you connect port A to system A, make sure the Power
LED on port A is not lit.
Windows 98SE
1. Insert the driver CD after Windows boots.
2. AutoRun should start the installation. If
AutoRun doesn't start, click Start, Run, Type
D:\setup.exe, then click OK. (Change D: to
match your CD-ROM drive).
3. Select the correct language and click OK.
4. Click Next, Next, then Finish.
5. Restart your system. After Windows boots,
connect the USB 2.0 Switch to your systems with
the USB cables.
6. When Windows prompts for the driver again,
click Next.
7. Select Search for the best driver..., and click
Next.
8. Clear all check boxes, click Next, Next, then
Finish. Click Yes to restart.