SIIG 04-0448A Network Card User Manual


 
2
Layout
Figure 1. Layout
*Note: FireWire devices that have their own power
supply do not require the optional power adapter
to be connected in order to work. However,
non-powered FireWire devices require this optional
power adapter to work. The power adapter can be
purchased at SIIG's Online Store, part # NN-ADA011.
Hardware Installation
General instructions for installing the card are provided
below. Since the design of notebook computers may
vary, refer to your systems reference manual for further
information, if needed.
Insert the ExpressCard into the ExpressCard slot of your
notebook computer. Make sure it is inserted all the way
in for a solid connection.
Power Adapter Jack*
FireWire 800 ports
(9-pin)