Filter
Top Products
3
Hardware Installation
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1. Turn OFF the power to your computer.
2. Unplug the power cord and remove your computer's
cover.
3. Using the jumper setting on the Ultra ATA/ATAPI
device, set the device to Master. Read the Ultra
ATA/ATAPI device's user's manual for more
information. Important: Your device must be set to
Master in order for it to work properly through the
SATA-to-IDE Adapter.
4. Connect the SATA-to-IDE Adapter to the Ultra ATA/
ATAPI device, refer to Figure 2 and 3.
Figure 3
Figure 2