Filter
Top Products
4
4. To install the card, carefully align the card's
bus connector with the selected PCI slot on
the motherboard. Push the board down
firmly, but gently, until it is well seated.
5. Replace the slot bracket's holding screw to
secure the card.
6. Replace the computer cover and reconnect
the power cord.
Driver Installation
This section provides information on how to
install the DP 1-Port ECP/EPP Parallel PCI drivers.
Windows 8 (32-/64-bit) / Windows 7 (32-/
64-bit)
1. Install the board and boot up Windows.
Note: Windows 7 will automatically search
preconfigured driver folders for the proper
driver, this process may take several minutes
to complete. Do not interrupt this process.
2. Right click Computer, click Manage, click
Device Manager.