Filter
Top Products
4
5. To install the card, carefully align the card's
bus connector with the selected PCI Express
slot on the motherboard. Push the board
down firmly, but gently, until it is well
seated.
6. Replace the slot bracket holding screw to
secure the card.
Device Connection
The DP SATA 6Gb/s 2-Port PCIe is a dual channel
Serial ATA III controller that supports up to two
Serial ATA hard disk drives. If you plan to use
the second channel, you will need to purchase
another SATA data cable.
1. Install your hard disk drive(s) in the chassis.
2. Connect the Serial ATA hard disk drive to
the system power supply.
Note: For hard drives with both SATA
power connector and legacy 5-pin
connector, use either the SATA power
connector or the legacy 5-pin power
connector. Using both power connectors
may damage the hard drive.