Filter
Top Products
5
4. To install the card, carefully align the card's
bus connector with the selected PCIe slot on
the motherboard. Push the board down
firmly, but gently, until it is well seated.
5. Replace the slot bracket's holding screw to
secure the card.
6. Replace the computer cover and reconnect
the power cord.
7. Attach the external antennas to PCIe
adapter antenna ports.
Software Installation
NOTE: Server 2008 & 2008 R2 Microsoft WLAN
AutoConfig Service is not installed by default.
Follow the instructions below to install WLAN
AutoConfig Service to enable wireless network
support. After completing the installation, and
for all other Windows OS, go directly to Driver
Installation on page 7.
1. Right click Computer, then click Manage.
2. Right click Features, then click Add
Features.