Filter
Top Products
2
Layout
Figure 1: Layout
• Power LED: steady blue light means power on
• Activity LED: pink light means smart card is detected
Driver Installation
For 2000 and XP, follow the steps below to install
the driver. For other Windows and Mac OSes, the
driver is embedded, just plug the reader into a
USB port and the driver will load automatically.
1. Plug the card reader to an available USB
port. Click Cancel at the Found New
Hardware (if prompted).
2. Insert the driver CD. Double click RSKIT_
100618_AllinOne in the driver CD.
3. Wait while the driver installs, then click
Finish to complete the installation.
USB connector
Smart card
slot
Power and Activity LED indicators