Filter
Top Products
3
Windows Driver Installation
This section provides instructions to install the eSATA II
2-Port ExpressCard drivers.
Windows 2000
1. Install the ExpressCard into an ExpressCard slot.
2. At the Found New Hardware Wizard, click Next.
3. Select Search for a suitable driver for my device
(recommended) and click Next.
4. Insert the driver CD, check CD-ROM drives, uncheck
the other boxes, and click Next. Click Next again.
5. Click Finish then restart Windows to complete the
driver installation.
Windows XP / Server 2003 (32-bit)
1. Install the ExpressCard into an ExpressCard slot.
2. At the Found New Hardware Wizard:
XP (w/SP1 or earlier) / Server 2003: continue to step #3
XP (w/SP2 or later) / Server 2003 (w/ SP1 or later):
select No, not this time, then click Next.
3. Insert the driver CD, select Install the software
automatically (Recommended), click Next, then
click Next again.
4. Click Finish, then restart Windows to complete the
driver installation.
Windows XP / Server 2003 (64-bit)
1. Install the ExpressCard into an ExpressCard slot.
2. At the Found New Hardware Wizard, select No, not
this time, then click Next