Filter
Top Products
4
5. To install the card, carefully align the card's
bus connector with the selected PCI slot on
the motherboard. Push the board down
firmly, but gently, until it is well seated.
6. Replace the slot bracket's holding screw to
secure the card.
7. Mount the second serial port and secure it
with the slot bracket holding screw. Skip
this step if you only need two serial ports.
8. Replace the computer cover and reconnect
the power cord.
Driver Installation
This section provides information on how to
install the 4-Port RS232 Serial PCI with 16550
UART drivers.
Windows 8 (32-/64-bit) / 7 (32-/64-bit) /
Server 2008 R2
1. Install the board and boot up Windows.
Note: Windows 7 will automatically search
preconfigured driver folders for the proper
driver. This process may take several
minutes. Do not interrupt this process.