Filter
Top Products
6
7. Type in D:\NT4\Install_Parallel.exe, then click OK.
(Change D: to match your CD-ROM drive letter)
8. Repeat steps 3-5.
9. Click Yes to restart Windows to complete the
installation.
To Verify Successful Installation In Windows NT 4.0:
1. Go to Start / Settings / Control Panel, double click
Ports device icon.
2. A new COM port will be assigned when successfully
installed.
3. Click Start, Programs, Administrative Tools,
Windows NT Diagnostics. Click Resources tab,
SIIGpar and SIIGser should be displayed.
Windows 2000 Driver Installation
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(recommended), and click Next.
3. Select Specify a location, uncheck the other boxes,
and click Next.
4. Insert the driver CD, type in D:\2000, then click OK.
(Change D: to match your CD-ROM drive letter)
5. Click Next and Finish.
6. Repeat steps 1-5 two more times.
7. Restart Windows to complete the installation.
Windows XP Driver Installation
1. At the Found New Hardware Wizard, choose Install
from a list or specific location (Advanced), then
click Next.