Filter
Top Products
6
To Verify Windows NT 4.0 Installation
1. Click Start, Settings, Control Panel, double click
Ports device icon.
2. Two new COM ports will be assigned when
successfully installed.
Windows 2000
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(recommended), and click Next.
3. Check Specify a location, uncheck the other boxes,
and click Next.
4. Insert the driver CD, type in D:\2000, then click OK.
(Change D: to match your CD-ROM drive letter)
5. Click Next and Finish.
6. Repeat steps 1-5 two more times.
7. Restart Windows to complete the installation.
Windows XP
1. At the Found New Hardware Wizard, select Install
from a list or specific location (Advanced), then
click Next.
2. Insert the driver CD, check Include this location in
the search, uncheck the other check box, type in
D:\XP, and click Next. (Change D: to match your
CD-ROM drive letter)
3. If the Hardware Installation window pops up, click
Continue Anyway, then Finish. Our driver has been
tested for stability and compatibility.
4. Repeat steps 1-3 three more times.
5. Restart Windows to complete the installation.