Filter
Top Products
11
Setting up and connecting
KH 2600
GB
IE
Disposal of the packaging
The packaging protects the device from transport damage. The packaging
materials are chosen from an environmentally friendly and disposal technological
point of view and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
If possible preserve the device's original packaging during the warranty ►
period so that in the case of a warranty claim you can package the device
properly for r
eturn.
Requirements for the set-up location
For safe and fault free operation of the device, the set-up location must fulfi ll the
following conditions:
Place the device on a fi rm, fl at and level surface. ■
To avoid overheating maintain a free space of at least 15 cm around and ■
40 cm above the device.
Do not position the device in a dust
y, hot, wet or very humid environment or ■
in the vicinity of fl ammable materials.
Protect the de
vice from vibration. ■
The surfaces of furniture may contain components that could aff ect and ■
soften the rubber feet on the device. If necessary, place an anti-slip mat or
similar under the rubber feet of the de
vice.
The w
all socket must be easily accessible so that, in an emergency, the plug ■
can be quickly withdrawn from the socket.