Filter
Top Products
3 Connecting to a Windows NT 3.51 Server
Windows for Workgroups
3 Connecting to a Windows NT 3.51 Server
Windows for
Workgroups
Requirements
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04.
• Driver Name for Vectra VL8 and VL7: IBMMPC.DOS Size: 60KB Date: 4/
4/97.
• Driver Name for Vectra VE7/VE8: Streamer.386 Size:85KB Date: 09/13/
96.
• Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/
SPX, and NWLink NetBIOS transfer protocols.
• Netware client for DOS and MS-Windows.
Device Configuration
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI
Diagnostic Disk) and power on the machine.
3 After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4 Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5 After windows loads, open the “NETWORK” folder, and double-click the
“NETWORK SETUP” icon.
6 Select “Networks” and choose “Install Microsoft Windows Network” and
click on “OK.”
Vectra VL8 Vectra VL7 Vectra VE7/VE8
Interrupt 11 11(10) 10(11)
I/O Address F800-h C800h DC00-h