Filter
Top Products
26 Configuring the SMART Hub SE240
1. Press Menu.
The Welcome Center appears.
2. Press Settings.
The Settings dialog box appears.
3. If a password is required to change the configuration settings, type the password in the box at
the bottom of the menu, and then press OK.
NOTE: For information on the configuration settings password, see page 20.
4. Press Display Configuration.
NOTE: The top portion of the Display Configuration tab shows information on the projector or
display connected to the SMART Hub SE240. You can refresh this information by pressing
Refresh.
5. In the Resolution list, select a resolution.
To configure the display settings
TIP
If the selected resolution is not supported by the projector or display, press
CTRL+ALT+SHIFT+0 to reset the display settings. The SMART Hub SE240
display may take several minutes to reappear.