Filter
Top Products
Configuring the SMART Hub SE240 33
1. Press Menu.
The Welcome Center appears.
2. Press Settings.
The Settings dialog box appears.
3. If a password is required to change the configuration settings, type the password in the box at
the bottom of the menu, and then press OK.
NOTE: For information on the configuration settings password, see page 20.
4. Press Network and Conference.
5. Press Conferencing.
6. Select the Enable sharing with LinQ software check box to connect to LinQ software client
computers.
7. Select the Prompt before viewing a shared desktop using LinQ check box to prompt users
before connecting to LinQ software client computers.
8. Press Apply All.
You’ve configured LinQ software.
To configure LinQ software