Filter
Top Products
36 Configuring the SMART Hub SE240
Connect the SMART Hub SE240 to the computer or room control system using the female RS-232
connector.
1. Press Menu.
The Welcome Center appears.
2. Press Settings.
The Settings dialog box appears.
3. If a password is required to change the configuration settings, type the password in the box at
the bottom of the menu, and then press OK.
NOTE: For information on the configuration settings password, see page 20.
4. Press Administration.
To connect the computer or room control system to the SMART Hub SE240
IMPORTANT
The female RS-232 connector is for room control only.
To enable the SMART Hub SE240’s room control mode
Female RS-232 Connector