Filter
Top Products
38 Configuring the SMART Hub SE240
5. Press Network and Conference.
6. Press Management, Room Control.
7. Select the Enable room control via telnet check box.
8. In the Port number text box, type the port number for TELNET.
NOTE: 23 is the default port number for TELNET.
9. Press Apply All.
You’ve connected a computer or room control system to the SMART Hub SE240 through TELNET.
Command Summary
The SMART Hub SE240 responds to the following types of commands:
• power state
• input selection
• video and audio
• conferencing
• system information
NOTES
• Press Enter after each command.
• Commands aren’t case-sensitive.