Filter
Top Products
C
ONFIGURING
C
LIENT
PC
3-16
Disable HTTP Proxy
You need to verify that the “HTTP Proxy” feature of your web browser is
disabled. This is so that your browser can view the ADSL Router’s HTML
configuration pages (refer to “Internet Explorer” on page 3-5).
Obtain IP Settings from Your ADSL Router
Now that you have configured your computer to connect to your ADSL
Router, it needs to obtain new network settings. By releasing old DHCP IP
settings and renewing them with settings from your ADSL Router, you can
verify that you have configured your computer correctly.
1. On the Windows desktop, click Start/Programs/Accessories/
Command Prompt.
2. In the Command Prompt window, type “IPCONFIG/RELEASE”
and press the ENTER key.
3. Type “IPCONFIG /RENEW” and press the ENTER key. Verify that
your IP Address is now 192.168.2.xxx, your Subnet Mask is
255.255.255.0 and your Default Gateway is 192.168.2.1.
These values confirm that your ADSL router is functioning.
Type “EXIT” and press the ENTER key to close the Command Prompt
window.
Your computer is now configured to connect to the ADSL Router.