SMC Networks EZ Card 10 Network Card User Manual


 
The EZ Card 10/100
SMC’s EZ Card
10/100 network interface card is a dual-speed Fast Ethernet card for PCI local bus
compliant computers. Designed to take advantage of the wider data path and increased data transfer
rate provided by the PCI bus, the EZ Card 10/100 delivers higher data throughput than comparable
ISA or EISA network cards. A true plug and play device, this card is auto-configurable upon power
up and also supports Auto-Negotiation, which automatically detects the optimum speed and
communication mode of an attached device and configures the card to operate accordingly.
Features and Benefits
Conforms to ANSI/IEEE 802.3 and 802.3u standards
Compatible with PCI Local Bus Specification Rev. 2.0 or later
PCI 32-bit Bus-Master architecture provides high data throughput
Single 10/100 Mbps RJ-45 port for easy migration from Ethernet to Fast Ethernet
Auto-Negotiation for automatic selection of data rate (10 or 100 Mbps) and mode (half/full duplex)
Automatic configuration setup using the PCI computer’s BIOS setup program
Supports full-duplex operation for twice the effective bandwidth in a switched network
Supports early receive and transmit interrupt to boost data throughput
Supports optional boot ROM for remote system/network access
“At-a-glance” LED indicators for network traffic monitoring