Filter
Top Products
26
C
ONFIGURING
THE
W
IRELESS
B
ARRICADE
G
R
OUTER
The Wireless Barricade g Router can be configured by any
Java-supported browser including Internet Explorer 4.0 or above,
or Netscape Navigator 4.0 or above. Using the Web
management interface, you can configure the Router and view
statistics to monitor network activity.
Note: Before you attempt to configure your router, if you have
access to the Internet please visit www.smc.com
and
download the latest firmware update to ensure your
Router is running the latest firmware.
Before you attempt to log into the Web-based Administration,
please verify the following.
1. Your browser is configured properly (see below).
2. Disable any firewall or security software that may be running.
3. Confirm that you have a good link LED where your computer
is plugged into the Router. If you don’t have a link light, then
try another cable until you get a good link.
Browser Configuration
Confirm your browser is configured for a direct connection to the
Internet using the Ethernet cable that is installed in the computer.
This is configured through the options/preference section of your
browser.