SMC Networks SMC7901WBRA2 B1 Network Router User Manual


 
C
HAPTER
1
| Introduction
Hardware Description
– 28 –
ETHERNET PORT The ADSL Router has one 100BASE-TX RJ-45 port that can be attached
directly to 10BASE-T/100BASE-TX LAN segments.
This port supports automatic MDI/MDI-X operation, so you can use
straight-through cables for all network connections to PCs, switches, or
hubs.
POWER CONNECTOR
AND
BUTTON
The ADSL Router has a power button. When the AC power adapter is
attached and connected to a power source, you must depress the power
button to power the unit.
The power adapter automatically adjusts to any voltage between 100~240
volts at 50 or 60 Hz, and supplies 12 volts DC power to the unit. No voltage
range settings are required.
RESET BUTTON This button is used to restore the factory default configuration. If you hold
down the button for 5 seconds or more, any configuration changes you
may have made are removed, and the factory default configuration is
restored to the access point.