Filter
Top Products
-36-
C.2 MediaOne
1. Be sure you have a computer that is already set up to access MediaOne and that the
MAC address of the Ethernet adapter used in this computer is the one registered with
your ISP. Please use this computer and Ethernet adapter to perform the following
steps.
2. Connect the Ethernet adapter to any LAN port of the SMC7004BR and connect the
cable modem to the WAN port of SMC7004BR.
3. Power on the SMC7004BR. After it is working, please run WINIPCFG in your
Windows platform and release and renew the IP address manually. This step ensures
that your PC obtains the correct TCP/IP setting from the newly configured
SMC7004BR.
4. Log in as system administrator and click "Primary Setup."
5. Configure the WAN type as "Dynamic IP Address."
6. Save the setting for "Primary Setup."
7. Click "Toolbox" and check the WAN's MAC Address.
8. Click "Clone MAC" button. It will copy the MAC address of the Ethernet adapter used
in your computer and change the WAN's MAC Address.
9. Reboot SMC7004BR.
NOTE: You can restore the WAN's MAC Address by clicking the "Restore MAC" button.