Filter
Top Products
6
HARDWARE INSTALLATION
Warning: Network cards are sensitive to static electricity. To protect the
card, always touch the metal chassis of your computer before
handling the card.
1. Turn on your computer and boot your operating system.
2. Find an available Type II CardBus slot in your computer.
3. With the CardBus’s 68-pin connector facing the CardBus slot and the
“EZ Connect Wireless Cardbus Adapter” label facing up, slide the
card completely into the slot as shown below.
Note: The SMC2635W Wireless Cardbus Adapter allows you to “hot
swap” PC Cards any time, even when your computer is powered
on.