C
ONFIGURING
THE
S
WITCH
3-308
Web - Click Routing Protocol, OSPF, General Configuration. Enable
OSPF, specify the Router ID, configure the other global parameters as
required, and click Apply.
Figure 3-133 OSPF General Configuration
CLI - This example configures the router with the same settings as shown
in the screen capture for the web interface.
Console(config)#router ospf 4-340
Console(config-router)#router-id 10.1.1.253 4-340
Console(config-router)#no compatible rfc1583 4-341
Console(config-router)#default-information originate always
metric 10 metric-type 2 4-342
Console(config-router)#timers spf 10 4-343
Console(config-router)#