B
ASIC
C
ONFIGURATION
3-15
Basic Configuration
Displaying System Information
You can easily identify the system by displaying the device name, location
and contact information.
Field Attributes
• System Name – Name assigned to the switch system.
• Object ID – MIB II object ID for switch’s network management
subsystem.
• Location – Specifies the system location.
• Contact – Administrator responsible for the system.
• System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
• MAC Address – The physical layer address for this switch.
• Web server – Shows if management access via HTTP is enabled.
• Web server port – Shows the TCP port number used by the web
interface.
NSSA Settings Configures settings for importing routes into
or exporting routes out of not-so-stubby areas
3-329
Link State Database
Information
Shows information about different OSPF
Link State Advertisements (LSAs) stored in
this router’s database
3-330
Border Router
Information
Displays routing table entries for area border
routers and autonomous system boundary
routers
3-333
Neighbor Information Displays information about neighboring
routers on each interface within an OSPF area
3-334
Table 3-2 Switch Main Menu (Continued)
Menu Description Page