Filter
Top Products
C
ONFIGURING
THE
S
WITCH
3-120
• Creation
7
– Shows if a trunk is manually configured or dynamically set
via LACP.
Web – Click Port, Port Information or Trunk Information.
Figure 3-53 Port - Port Information
Field Attributes (CLI)
Basic information:
• Port type – Indicates the port type. (1000BASE-T, SFP, or
10GBASE-LR)
• MAC address – The physical layer address for this port. (To access this
item on the web, see “Setting the Switch’s IP Address” on page 3-22.)
Configuration:
• Name – Interface label.
• Port admin – Shows if the interface is enabled or disabled (i.e., up or
down).
• Speed-duplex – Shows the current speed and duplex mode. (Auto, or
fixed choice)
• Capabilities – Specifies the capabilities to be advertised for a port
during auto-negotiation. (To access this item on the web, see
7. Trunk Information only.