Filter
Top Products
P
ORT
C
ONFIGURATION
3-145
Web - Click Port, Rate Limit, Input/Output Port/Trunk Configuration.
Set the Input Rate Limit Status or Output Rate Limit Status, then set the
rate limit for the individual interfaces, and click Apply.
Figure 3-63 Rate Limit Configuration
CLI - This example sets the rate limit for input and output traffic passing
through port 1 to 600 Mbps.
Showing Port Statistics
You can display standard statistics on network traffic from the Interfaces
Group and Ethernet-like MIBs, as well as a detailed breakdown of traffic
based on the RMON MIB. Interfaces and Ethernet-like statistics display
errors on the traffic passing through each port. This information can be
used to identify potential problems with the switch (such as a faulty port or
unusually heavy loading). RMON statistics provide access to a broad range
of statistics, including a total count of different frame types and sizes
passing through each port. All values displayed have been accumulated
Console(config)#interface ethernet 1/1 4-187
Console(config-if)#rate-limit input 600 4-203
Console(config-if)#rate-limit output 600
Console(config-if)#