Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-284
Example
Related Commands
map ip dscp (Global Configuration) (4-279)
map ip dscp (Interface Configuration) (4-280)
Quality of Service Commands
The commands described in this section are used to configure Differentiated
Services (DiffServ) classification criteria and service policies. You can classify
traffic based on access lists, IP Precedence or DSCP values, or VLANs.
Using access lists allows you select traffic based on Layer 2, Layer 3, or Layer
4 information contained in each packet.
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port DSCP COS
--------- ---- ---
Eth 1/ 1 0 0
Eth 1/ 1 1 0
Eth 1/ 1 2 0
Eth 1/ 1 3 0
.
.
.
Eth 1/ 1 61 0
Eth 1/ 1 62 0
Eth 1/ 1 63 0
Console#
Table 4-72 Quality of Service Commands
Command Function Mode Page
class-map Creates a class map for a type of traffic GC 4-286
match Defines the criteria used to classify traffic CM 4-287
policy-map Creates a policy map for multiple interfaces GC 4-289
class Defines a traffic classification for the policy to
act on
PM 4-290
set Classifies IP traffic by setting a CoS, DSCP, or
IP-precedence value in a packet
PM-C 4-291
police Defines an enforcer for classified traffic PM-C 4-292