Filter
Top Products
E
NTERING
C
OMMANDS
4-9
• Interface Configuration - These commands modify the port configuration
such as speed-duplex and negotiation.
• Line Configuration - These commands modify the console port and Telnet
configuration, and include command such as parity and databits.
• Router Configuration - These commands configure global settings for
unicast routing protocols.
• VLAN Configuration - Includes the command to create VLAN groups.
• Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
• Class Map Configuration - Creates a DiffServ class map for a specified
traffic type.
• Policy Map Configuration - Creates a DiffServ policy map for multiple
interfaces.
To enter the Global Configuration mode, enter the command configure in
Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#