Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-246
Editing VLAN Groups
vlan database
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the
VLAN settings by entering the show vlan command.
•Use the interface vlan command mode to define the port membership
mode and add or remove ports from a VLAN. The results of these
commands are written to the running-configuration file, and you can
display this file by entering the show running-config command.
Configuring Private
VLANs
Configures private VLANs, including uplink and
downlink ports
4-257
Configuring Protocol
VLANs
Configures protocol-based VLANs based on frame
type and protocol
4-259
Table 4-60 Editing VLAN Groups
Command Function Mode Page
vlan database Enters VLAN database mode to add, change,
and delete VLANs
GC 4-246
vlan Configures a VLAN, including VID, name and
state
VC 4-247
Table 4-59 VLAN Commands (Continued)
Command Groups Function Page