Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-80
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 3-15.
• The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: SMC8748ML3 L3 GE Switch
System OID string: 1.3.6.1.4.1.202.20.45
System information
System Up time: 0 days, 0 hours, 11 minutes, and 15.59
seconds
System Name: [NONE]
System Location: [NONE]
System Contact: [NONE]
MAC address (unit1): 00-20-1A-DF-9E-C0
Web server: enabled
Web server port: 80
Web secure server: enabled
Web secure server port: 443
Telnet server: enable
Telnet server port: 23
Jumbo Frame: Disabled
POST result
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Crossbar Int Loopback Test ... PASS
Fan Speed Test ............... PASS
Console#