Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-140
snmp-server
This command enables the SNMPv3 engine and services for all management
clients (i.e., versions 1, 2c, 3). Use the no form to disable the server.
Syntax
[no] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
show snmp
This command can be used to check the status of SNMP communications.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command provides information on the community access strings,
counter information for SNMP input and output protocol data units, and
whether or not SNMP logging has been enabled with the snmp-server
enable traps command.
show snmp group Shows the SNMP groups PE 4-153
snmp-server user Adds a user to an SNMP group GC 4-154
show snmp user Shows the SNMP users PE 4-156
Console(config)#snmp-server
Console(config)#
Table 4-37 SNMP Commands (Continued)
Command Function Mode Page