Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-248
Example
The following example adds a VLAN, using VLAN ID 105 and name RD5.
The VLAN is activated by default.
Related Commands
show vlan (4-256)
Configuring VLAN Interfaces
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Table 4-61 Configuring VLAN Interfaces
Command Function Mode Page
interface vlan Enters interface configuration mode for a
specified VLAN
IC 4-249
switchport mode Configures VLAN membership mode for
an interface
IC 4-250
switchport
acceptable-frame-types
Configures frame types to be accepted by an
interface
IC 4-251
switchport
ingress-filtering
Enables ingress filtering on an interface IC 4-252
switchport native vlan Configures the PVID (native VLAN) of an
interface
IC 4-253
switchport allowed vlan Configures the VLANs associated with an
interface
IC 4-254
switchport gvrp Enables GVRP for an interface IC 4-266
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 4-255
switchport priority
default
Sets a port priority for incoming untagged
frames
IC 4-271