Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-8
“Console#” command prompt. You can also enter Privileged Exec mode
from within Normal Exec mode, by entering the enable command, followed
by the privileged level password “super” (page 4-37).
To enter Privileged Exec mode, enter the following user names and
passwords:
Configuration Commands
Configuration commands are privileged level commands used to modify
switch settings. These commands modify the running configuration only and
are not saved when the switch is rebooted. To store the running
configuration in non-volatile storage, use the copy running-config
startup-config command.
The configuration commands are organized into different modes:
• Global Configuration - These commands modify the system level
configuration, and include commands such as hostname and snmp-server
community.
• Access Control List Configuration - These commands are used for packet
filtering.
• DHCP Configuration - These commands are used to configure the DHCP
server.
Username: admin
Password: [admin login password]
CLI session with the SMC8748ML3 is opened.
To end the CLI session, enter [Exit].
Console#
Username: guest
Password: [guest login password]
CLI session with the SMC8748ML3 is opened.
To end the CLI session, enter [Exit].
Console>enable
Password: [privileged level password]
Console#