Filter
Top Products
A
UTHENTICATION
C
OMMANDS
4-101
Example
show tacacs-server
This command displays the current settings for the TACACS+ server.
Default Setting
None
Command Mode
Privileged Exec
Example
Port Security Commands
These commands can be used to enable port security on a port. When using
port security, the switch stops learning new MAC addresses on the specified
port when it has reached a configured maximum number. Only incoming
traffic with source addresses already stored in the dynamic or static address
table for this port will be authorized to access the network. The port will
drop any incoming frames with a source MAC address that is unknown or
has been previously learned from another port. If a device with an
unauthorized MAC address attempts to use the switch port, the intrusion will
be detected and the switch can automatically take action by disabling the port
and sending a trap message.
Console(config)#tacacs-server key green
Console(config)#
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 10.11.12.13
Communication key with TACACS server: *****
Server port number: 49
Console#