C
OMMAND
L
INE
I
NTERFACE
4-162
service dhcp
This command enables the DHCP server on this switch. Use the no form to
disable the DHCP server.
Syntax
[no] service dhcp
Default Setting
Enabled
Command Mode
Global Configuration
netbios-name-server Configures NetBIOS Windows Internet
Naming Service (WINS) name servers
available to Microsoft DHCP clients
DC 4-169
netbios-node-type Configures NetBIOS node type for Microsoft
DHCP clients
DC 4-170
lease Sets the duration an IP address is assigned to
a DHCP client
DC 4-171
host
*
Specifies the IP address and network mask to
manually bind to a DHCP client
DC 4-172
client-identifier
*
Specifies a client identifier for a DHCP client DC 4-173
hardware-address
*
Specifies the hardware address of a DHCP
client
DC 4-174
clear ip dhcp binding Deletes an automatic address binding from
the DHCP server database
PE 4-175
show ip dhcp
binding
Displays address bindings on the DHCP
server
PE,
NE
4-176
* These commands are used for manually binding an address to a client.
Table 4-45 DHCP Server Commands (Continued)
Command Function Mode Page