Filter
Top Products
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-61
Command Usage
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by
the switch. However, it may be used by the syslog server to sort messages
or to store messages in the corresponding database.
Example
logging trap
This command enables the logging of system messages to a remote server, or
limits the syslog messages saved to a remote server based on severity. Use
this command without a specified level to enable remote logging. Use the no
form to disable remote logging.
Syntax
logging trap [level]
no logging trap
level - One of the syslog severity levels listed in the table on page 4-58.
Messages sent include the selected level up through level 0.
Default Setting
•Disabled
•Level 7 - 0
Command Mode
Global Configuration
Command Usage
• Using this command with a specified level enables remote logging and
sets the minimum severity level to be saved.
• Using this command without a specified level also enables remote
logging, but restores the minimum severity level to the default.
Console(config)#logging facility 19
Console(config)#