Filter
Top Products
C
ONFIGURING
THE
S
WITCH
3-60
The engine ID can be specified by entering 1 to 26 hexadecimal characters.
If less than 26 characters are specified, trailing zeroes are added to the
value. For example, the value “1234” is equivalent to “1234” followed by
22 zeroes.
Web – Click SNMP, SNMPv3, Remote Engine ID. Enter an ID of up to
26 hexadecimal characters and then click Save.
Figure 3-29 Setting an Engine ID
CLI – This example specifies a remote SNMPv3 engine ID.
Configuring SNMPv3 Users
Each SNMPv3 user is defined by a unique name. Users must be configured
with a specific security level and assigned to a group. The SNMPv3 group
restricts users to a specific read and a write view.
Command Attributes
• User Name – The name of user connecting to the SNMP agent.
(Range: 1-32 characters)
• Group Name – The name of the SNMP group to which the user is
assigned. (Range: 1-32 characters)
• Security Model – The user security model; SNMP v1, v2c or v3.
Console(config)#snmp-server engineID remote 54321 192.168.1.19 4-147
Console(config)#exit
Console#show snmp engine-id 4-149
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Remote SNMP engineID IP address
80000000030004e2b316c54321 192.168.1.19
Console#