Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-94
server. If the TACACS+ server is not available, the local user name and
password is checked.
Example
Related Commands
enable password - sets the password for changing command modes (4-37)
RADIUS Client
Remote Authentication Dial-in User Service (RADIUS) is a logon
authentication protocol that uses software running on a central server to
control access to RADIUS-aware devices on the network. An authentication
server contains a database of multiple user name/password pairs with
associated privilege levels for each user or group that require management
access to a switch.
Console(config)#authentication enable radius
Console(config)#
Table 4-29 RADIUS Client Commands
Command Function Mode Page
radius-server host Specifies the RADIUS server GC 4-95
radius-server port Sets the RADIUS server network port GC 4-96
radius-server key Sets the RADIUS encryption key GC 4-96
radius-server retransmit Sets the number of retries GC 4-97
radius-server timeout Sets the interval between sending
authentication requests
GC 4-97
show radius-server Shows the current RADIUS settings PE 4-98