Filter
Top Products
R
OUTER
R
EDUNDANCY
C
OMMANDS
4-387
note that if the original master (i.e., the owner of the VRRP IP address)
comes back on line, it will always resume control as the master.
• The delay can give additional time to receive an advertisement message
from the current master before taking control. If the router attempting
to become the master has just come on line, this delay also gives it time
to gather information for its routing table before actually preempting the
currently active router.
Example
Related Commands
vrrp priority (4-384)
show vrrp
This command displays status information for VRRP.
Syntax
show vrrp [brief | group]
• brief - Displays summary information for all VRRP groups on this
router.
• group - Identifies a VRRP group. (Range: 1-255)
Defaults
None
Command Mode
Privileged Exec
Command Usage
• Use this command without any keywords to display the full listing of
status information for all VRRP groups configured on this router.
• Use this command with the brief keyword to display a summary of status
information for all VRRP groups configured on this router.
• Specify a group number to display status information for a specific group
Console(config-if)#vrrp 1 preempt delay 10
Console(config-if)#