C
OMMAND
L
INE
I
NTERFACE
4-186
Interface Commands
These commands are used to display or set communication parameters for
an Ethernet port, aggregated link, or VLAN.
Table 4-48 Interface Commands
Command Function Mode Page
interface Configures an interface type and enters interface
configuration mode
GC 4-187
description Adds a description to an interface configuration IC 4-187
speed-duplex Configures the speed and duplex operation of a
given interface when autonegotiation is disabled
IC 4-188
negotiation Enables autonegotiation of a given interface IC 4-189
capabilities Advertises the capabilities of a given interface for
use in autonegotiation
IC 4-190
flowcontrol Enables flow control on a given interface IC 4-191
media-type Force port type selected for combination ports IC 4-192
shutdown Disables an interface IC 4-193
switchport
broadcast
packet-rate
Configures the broadcast storm control
threshold
IC 4-194
clear counters Clears statistics on an interface PE 4-195
show interfaces
status
Displays status for the specified interface NE,
PE
4-196
show interfaces
counters
Displays statistics for the specified interfaces NE,
PE
4-197
show interfaces
switchport
Displays the administrative and operational
status of an interface
NE,
PE
4-199